🔧 Step-by-Step Instructions
1. Prepare the Garment

• Wash the garment beforehand (optional but recommended).

• Use a lint roller to remove dust, lint, or debris.

• Pre-press the garment for 5–10 seconds at 300–320°F (150–160°C) to remove moisture and wrinkles.

2. Position the DTF Transfer

• Place the DTF transfer film (print side down) on the garment.

• Align it carefully using a ruler or alignment tool.

• Use heat-resistant tape to hold it in place if needed.

3. Heat Press Settings

• Temperature: 300–320°F (150–160°C)

• Pressure: Medium to firm

• Time: 15–20 seconds

4. Press the Transfer

• Cover the transfer with a Teflon sheet or parchment paper.

• Close the heat press and apply pressure for the recommended time.

​

5. Cool Peel

• Let the film cool completely before peeling.

• Slowly peel the film cold to avoid lifting the design.

​

6. Final Press (Optional but Recommended)

• Cover the design with a Teflon sheet again.

• Press for 5–10 seconds to improve durability and finish.